www.azmicrotek.com 1630 s stapley dr, suite 127 +1 - 480- 962- 5881 mesa, az 85204 usa request a sample may 2012, rev 2.0 d escription the az100lvel16 is a differential receiver with an internal input clamp. it is ideally suited for interfacing with high frequency sources. under open input conditions, the internal input clamp will force the q output low and the q high. the az100lvel16 provides a v bb output for single - ended use or a dc bias reference for ac coupling to the device. the az100lvel16 is a direct replacement for the on semiconductor mc100el16 & mc100lvel16 b lock d iagram f eatures ? high bandwidth output transitions ? 250ps propagation delay ? 3v to 5.5v power supply ? internal input pulldown resistors a pplications ? general application s p ackage a vailability ? mlp 8 ? msop8 ? soic8 ? green/rohs compliant/pb - free az 100lvel16 p e cl/ecl differential receiver part number ( pn) package marking az100lvel16ng 1 mlp 8 q6 g 2 az100lvel16t+ 1 msop8 azh + lv 16 2 az100lvel 16dg 1 soic 8 azm100glvel 16 2 1 ta pe & reel - add 'r1' at end of pn for 7in (1k parts), 'r2' (2.5k) for 13in 2 see www.azmicrotek.com for date code format www.azmicrotek.com
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 2 request a sample may 2012, rev 2.0 p in d escription and c onfiguration table 1 - pin description az100lvel16n pin name type function 1 nc - n/a 2 d input data input 3 d input inverting data input 4 v bb output reference voltage 5 v ee power negative sup ply 6 q output inverting pecl output 7 q output pecl output 8 v cc power positive supply table 2 - pin description az100lvel16t & az100lvel16d pin name type function 1 nc - n/a 2 d input data input 3 d input inverting data input 4 v bb output reference voltage 5 v ee power negative supply 6 q output inverting pecl output 7 q output pecl output 8 v cc power positive supply nc d v bb q q v ee v cc 4 3 2 1 6 5 8 7 leave pad open or connect to v ee d figure 1 - pin configuration az100lvel16n 4 3 2 1 8 5 6 7 q q v ee v cc nc d v bb d figure 2 - pin configuration az100lvel16t & az100lvel16d
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 3 request a sample may 2012, rev 2.0 e ng ineering n otes the az100lvel16 is a differential re ceiver. the device is functionally equivalent to the e116 device with higher performance capabilities. with output transition times significantly faster than the e116, the az100lvel16 is ideally suited for interfacing with high frequency sources. the az100 lvel16 provides a v bb output for single - ended use or a dc bias reference for ac coupling to the device. for single - ended input applications, the v bb reference should be connected to one side of the d/ d differential input pair. the input signal is then fed to the other d/ d input. the v bb pin can support 1.5 ma sink/source current. when used, the v bb pin should be bypassed to ground via a 0.01 f capacitor. under open input conditions internal input clamps will force the q output low. measured with 750mv differential input, q/ q each terminated to v cc - 2v via 50 resistors. . figure 3 ? az100lvel16 typical large signal output swing graph
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 4 request a sample may 2012, rev 2.0 p erformance data table 3 ? absolute maximum ratings absolute maximum ratings are those values beyond which device life may be impaired. symbol characteristic condition rating unit v cc power supply v ee = 0v 0 t o + 6.0 v v i input voltage v ee = 0v 0 to + 6.0 v v d/d _ se single ended d/ d input voltage referenced to v bb 1.2 v i out output current continuous 50 ma surge 100 t a operating temperature range - - 40 to +85 c t stg storage tem perature range - - 65 to +150 c esd hbm human body model electro static discharge - 2500 v esd mm machine model electro static discharge - 200 v esd cdm charged device model electro static discharge - 2000 v table 4 - ecl dc char acteristics ecl dc characteristics (v ee = - 3.0v to - 5.5v, v cc = gnd) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1 - 1085 - 880 - 1025 - 880 - 1025 - 880 - 1025 - 880 mv v ol output low voltage 1 - 1830 - 1555 - 1810 - 1620 - 1810 - 1620 - 1810 - 1620 mv v bb reference voltage - 1380 - 1260 - 1380 - 1260 - 1380 - 1260 - 1380 - 1260 mv v ih input high voltage - 1165 - 880 - 1165 - 880 - 1165 - 880 - 1165 - 880 mv v il input low voltage - 1810 - 1475 - 1810 - 1475 - 1810 - 1475 - 1810 - 1475 mv i ih input high current 150 150 150 150 a i il input low current - 150 - 150 - 150 - 150 a i ee power supply current 22 22 22 24 ma 1. each output is terminated through a 50 ? resistor to v cc ? 2v.
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 5 request a sample may 2012, rev 2.0 table 5 ? lvpec l dc characteris t ics lvpecl dc characteristics ( v ee = gnd, vcc = +3.3v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1,2 2215 2420 2275 2420 2275 2420 2275 2420 mv v ol output low voltage 1,2 1 470 1745 1490 1680 1490 1680 1490 1680 mv v bb reference voltage 1 1920 2040 1920 2040 1920 2040 1920 2040 mv v ih input high voltage 1 2135 2420 2135 2420 2135 2420 2135 2420 mv v il input low voltage 1 1490 1825 1490 1825 1490 1825 1490 1825 mv i ih input h igh current 150 150 150 150 a i il input low current - 150 - 150 - 150 - 150 a i ee power supply current 22 22 22 24 ma 1. for supply voltages other that 3.3v, use the ecl table values and add supply voltage value. 2. each output is terminated through a 50 ? resistor to v cc ? 2v. table 6 ? pecl dc characteristics p ecl dc characteristics ( v ee = gnd, vcc = +5.0 v) symbol characteristic - 40 c 0 c 25 c 85 c unit min max min max min max min max v oh output high voltage 1,2 3915 4 120 3975 4120 3975 4120 3975 4120 mv v ol output low voltage 1,2 3170 3445 3190 3380 3190 3380 3190 3380 mv v bb reference voltage 1 3620 3740 3620 3740 3620 3740 3620 3740 mv v ih input high voltage 1 3835 4120 3835 4120 3835 4120 3835 4120 mv v il input low voltage 1 3190 3525 3190 3525 3190 3525 3190 3525 mv i ih input high current 150 150 150 150 a i il input low current - 150 - 150 - 150 - 150 a i ee power supply current 22 22 22 24 ma 1. for supply voltages other that 3.3v, use the ecl table value s and add supply voltage value. 2. each output is terminated through a 50 ? resistor to v cc ? 2v.
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 6 request a sample may 2012, rev 2.0 p ackage d iagram mlp8 green/rohs compliant/pb - free msl=1
arizona microtek, inc. az 100lvel16 p e cl/ecl differential receiver www.azmicrotek.com +1 - 480- 962- 5881 7 request a sample may 2012, rev 2.0 p ackage d iagram msop8 rohs compliant/pb - free arizona microtek, in c. reserves the right to change circuitry and specifications at any time without prior notice. arizona microtek, inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does arizona mic rotek, inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. arizona microtek, inc. does not c onvey any license rights nor the rights of others. arizona microtek, inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the ariz ona microtek, inc. product could create a situation where personal injury or death may occur. should buyer purchase or use arizona microtek, inc. products for any such unintended or unauthorized application, buyer shall indemnify and hold arizona microtek , inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that arizona microtek, inc. was negligent regarding the design or manufacture of the part.
|
